Philco POB 321 - Příručka (Stránka 4)

EN - 2
04/2012 Copyright © 2012, Fast ČR, a. s.
PART 1: IMPORTANT SAFETY INSTRUCTIONS
Recommendation:
Carefully read these instructions before installing and operating this oven. Write down the serial number found
on the rating label of the oven in the space below. It is essential that you store this user's manual in a safe place
so that you can use it in the future. If you intend to sell the appliance, give it to another owner, or if you move,
always make sure that the user's manual is attached to the appliance, so that the new owner can learn about
the operation of the appliance and the relevant warnings.
SERIAL NUMBER:
Important safety instructions
 This appliance is designed for domestic use as a built-in appliance.
 Remove all packaging materials and advertising labels. Dispose of packaging materials and advertising
labels in accordance with local codes.
 Do not allow children to play with the packaging material. There exists a risk of suff ocation.
 After unpacking the appliance and removing packaging / advertising materials, check that the appliance
has not been damaged in any way. In the event of damage, please contact an authorised service centre.
 The appliance MUST be installed and put into operation by an authorised service technician according to
the manufacturer's instructions contained in this manual.
 Installation performed by an unqualifi ed person may cause incorrect operation, damage to the appliance,
create a fi re hazard or cause injury to persons.
 Neither the manufacturer nor the vendor take responsibility for damages caused by incorrect or
unprofessional installation, connection or operation. Tampering with the appliance by an unqualifi ed
person will void the customer's right to a warranty repair.
 Do not turn on the oven until it is correctly and properly assembled.
 Ensure that the power cord is not tangled or wedged underneath the oven or another appliance.
 Do not subject the power cord to excessive pressure or temperatures.
 If the power cord is damaged it must be replaced by a service technician or another qualifi ed electrician.
Under no circumstances should you replace the power cord yourself. There is a risk of injury by electric
shock.
 If will not be using the oven, ensure that all controls are turned off .
 Warning: Before replacing lights ensure that all controls are turned off , the power cord is disconnected
from the power socket, or if appropriate the circuit breaker of the oven's circuit is turned off .
 Before cleaning, maintenance or moving the oven ensure that all controls are turned off , the power
cord is disconnected from the power socket, or if appropriate, the circuit breaker of the oven's circuit is
disengaged.
 Certain parts may heat up during long term use. Do not touch such parts. Wait until they cool down.
 Do not touch the heating element inside the oven.
 Warning: Prevent children from touching the appliance while it is in operation and warm.
 Do not store or use any fl ammable / volatile substances near the appliance.
 If you will use another electrical appliance near the oven, ensure that the power cord of such an appliance
is outside the heat emission range of the oven.
 During installation ensure that suffi cient air circulation is provided for. Follow the instructions contained in
the respective installation part of the user's manual.
 This user's manual is produced for several models at the same time. For this reason, certain parts
/ illustrations may diff er from the version of the appliance that you purchased. When reading the
user's manual adhere to all warnings and instructions.