Philco POB 321 - Příručka (Stránka 7)

EN - 5
04/2012 Copyright © 2012, Fast ČR, a. s.
PART 3: INSTALLATION
The appliance is made from the highest quality materials and components. Its modern, functional and practical
features will meet all your needs. Prior to installation and use, please carefully read this user's manual and make
sure you understand all the instructions. Rules necessary for the correct use and maintenance of the appliance
are provided below. It is necessary that the technician installing this appliance reads these instructions.
After unpacking this appliance, check that it is not damaged. In the event of damage, please contact an
authorised service centre. Under no circumstances should you use a damaged appliance or an appliance with
a damaged power cord.
Remove all packaging materials and advertising labels from the appliance. Dispose of these according to valid
local codes. Prevent children from playing with the packaging material. There exists a risk of suff ocation.
PLEASE CONTACT AN AUTHORISED SERVICE TECHNICIAN FOR THE INSTALLATION OF THE OVEN.
Installation location
Please adhere to the following instructions!
RANGE HOOD
(without a range hood) (with a range hood)
When selecting the installation location, ensure that in the vicinity of the oven there are no fl ammable, volatile
or combustible substances and materials, such as curtains, oil, clothing, etc. These present a fi re hazard.
Furniture around the appliance must be resistant against temperatures greater than 50°C.
The illustration below shows the requirements for the minimum distances from top shelves, range hoods,
etc. The minimum distance from a range hood must be 65 cm. If there is no range hood installed above the
appliance then the distance should not be less than 70 cm.