Philco POB 79 - Příručka (Stránka 44)

2. Hold the heating element with two
hands at the front.
3. Pull it forwards against the spring pres-
sure and out along the supports on the
two sides.
4. The heating element folds down.
You can clean the oven ceiling.
Installing the heating element
1. Install the heating element in the oppo-
site sequence.
Important! Install the heating element
correctly above the supports on the inner
walls of the appliance.
2. Install the shelf supports.
Cleaning the oven door
Removing the door and the glass panels
You can remove the oven door and the in-
ternal glass panels to clean it. The number
of glass panels is different for different
models.
Warning! Be careful when you remove
the door from the appliance. The door
is heavy.
A
A
1. Open the door fully.
2. Fully press the clamping levers (A) on
the two door hinges.
3. Close the oven door to the first open-
ing position (approximately 70° angle).
4. Hold the door with one hand on each
side and pull it away from the appli-
ance at an up angle.
5. Put the door with the outer side down
on a soft cloth on a stable surface. This
is to prevent scratches.
2
B
1
6. Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
7. Pull the door trim to the front to re-
move it.
16