Philco PX 4551 I - Příručka (Stránka 16)

EN - 14
07/2011 Copyright © 2011, Fast ČR, a. s.
 If you do not press any button within 2 seconds, the entered time will be set.
 The entered time will start to countdown in one minute intervals.
 The display will show the remaining time.
 This mode can be ended by holding down the freezing button for 3 seconds.
Display screensaver
Setting up:
 This mode can be activated by holding down the mode setting button for 5 seconds.
 If you do not press any button within 5 seconds of activating the mode, the control panel will turn off .
 If the control panel backlight is not on and you press any button, the display will show the selected setting
and you can perform any necessary setting adjustments. If you do not end the display screensaver mode
or press any button within 5 seconds, the control panel will turn off again.
 The screensaver mode can be ended by again holding down the mode setting button for 5 seconds.
 If the screensaver mode is active, you can also activate the child safety lock.
 If after activating the child safety lock you do not press any button within 5 seconds, the control panel
backlight will turn off again. In such a case you can view the selected settings or check whether the child
safety lock is activated by pressing any button. You may deactivate the child safety lock according to the
instructions for this mode.
Turned off light mode
When is it used?
 If you wish to turn off the lighting inside the refrigerator you can set this mode.
 Press and hold down the freezing, cooling and mode selection buttons at the same time and at the same
time 3 times open and close one of the doors. This will set this mode. Now the lighting will not be turned
on until this mode is ended in the same way as it was set.
 End this mode in the same way as it was activated, or it will be automatically terminated after 24 hours.
Economy lighting
This mode is used to save energy.
The lighting inside your refrigerator will not turn on in places where there is suffi
cient visibility.