Philco PX 4551 I - Příručka (Stránka 21)

EN - 19
07/2011 Copyright © 2011, Fast ČR, a. s.
PART 5: SETTING THE TEMPERATURE
The temperature needs to be set based on:
 temperature in the room where the appliance is located;
 amount of food stored;
 number of times the appliance is opened.
Setting the freezer temperature
The default value of the freezer temperature indicator is -18°C.
 Press the freezer button once.
 If you press this button once, the last set value will start to fl ash on the display.
 Every time this button is pressed the set temperature will be lowered.
 (-16°C, -18°C, -20°C, -22°C, -24°C, super freezing)
 If by pressing the freezer button you set super freezing, the respective symbol will appear on the freezer
temperature indicator and if you do not press any button within 1 second, the SF symbol (super freezing)
will stay on permanently.
 If you press this button again, the set temperature value will again start from -16°C.
 The temperature that is set before the activation of the holiday, super freezing, super cooling or economy
mode, will remain at the same level after the mode has fi nished or been cancelled. The refrigerator will
continue to run at this temperature level.
Warnings related to setting temperatures
 If a there is an electrical power outage the entered settings will not be cancelled.
 For reasons of effi ciency of your refrigerator, we do not recommend its use in an environment with
temperatures below 10 °C.
 The temperature setting should correspond to how often the door is open and the amount of food stored
inside the refrigerator.
 Do not go to a diff erent setting before completing the settings.
 After connecting to a power source leave the refrigerator permanently on depending on the ambient
temperature for at least 24 hours so that it can fully cool down to the temperature you set on the
thermostat. Do not open the door of your refrigerator too often during this time and do not insert too
much food.
 The refrigerator is equipped with a 5 minute delay function, which protects the compressor against
damage, for the situation where it is disconnected from the power source or there is an electrical power
outage. The refrigerator will again start to work normally after 5 minutes.