Philco POB 62 - Příručka (Stránka 51)

Important! Refer to chapter "Care and
Cleaning".
Setting and changing the time
After the first connection to the mains, all
symbols in the display are on for some sec-
onds. For the subsequent few seconds the
display shows the software version.
After the software version goes off, the dis-
play shows h and 12:00.
Setting the time of day:
1. Touch
or to set the hours.
2. Touch .
3. Touch or to set the minutes.
4. Touch or .
The Temperature / Time display shows the
new time.
Changing the time of day
You can change the time of day only when
the appliance is off. Touch
. flashes
in the display. To set the new time of day,
use the above procedure.
CONTROL PANEL
Electronic programmer
3 SEC. 3 SEC.
2 1 3 4 5 6 7 8 9 10 11
Use the sensor fields to operate the appli-
ance.
Sensor Field Function Description
1 - DISPLAY Shows the current settings of the appliance.
2 ON / OFF To activate and deactivate the appliance.
3 OPTIONS To set an oven function, an automatic programme
or a cleaning function (selected models only).
Straight access to an oven function when the ap-
pliance is off.
4 MY FAVOURITE PRO-
GRAMME
To store your favourite programme. Use it to have
access to your favourite programme directly or
when the appliance is deactivated.
5 TEMPERATURE / FAST
HEAT UP
To set and see the cavity temperature or the core
temperature sensor temperature (if present). If you
press and hold it for three seconds, it turns the
Fast heat up function ON or OFF. Straight access
to the temperature setting of the first oven func-
tion when the appliance is off.
6 UP, DOWN To move up or down in the menu.
7