Philco POB 62 - Příručka (Stránka 55)

Energy saving
The appliance contains features
which help you save energy during
everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to op-
erate). For this feature to operate,
the cooking time must be longer
than 30 minutes or you must use
the clock functions (Duration, End,
Time delay). This feature does not
operate with the grill functions.
– When the appliance is off, you can
use the heat to keep food warm.
The clock / residual heat display
shows the remaining temperature,
and the bars show the tempera-
ture as it decreases.
• Cooking with the lamp off - Touch
to deactivate the lamp during
cooking.
• Deactivating the display - If nec-
essary, you can fully deactivate the
appliance. Touch
and at the
same time until the display goes out.
This step also activates the appli-
ance.
• Eco functions - refer to "Oven func-
tions".
CLOCK FUNCTIONS
SYMBOL FUNCTION DESCRIPTION
TIME OF DAY To examine the time of day. For changing the time of day
refer to 'Setting and changing the time'.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates. You can use the
Duration and End functions at the same time (Time delay),
if the appliance is to be activated and deactivated auto-
matically later.
SET+GO To start the appliance with the necessary settings with on-
ly one touch of the sensor field, any time later.
Count Up Timer
Use the Count Up Timer to monitor how
long the appliance operates. It is on imme-
diately when the appliance starts to heat.
Reset the Count Up Timer: touch
.
Touch until the display shows "00:00"
and the Count Up Timer starts to count up
again.
You cannot use the Count Up Timer
when Duration or End is set.
Setting the DURATION
1. Activate the appliance and set an oven
function and temperature.
2. Touch again and again until the dis-
play shows . flashes in the dis-
play.
3. Use or to set the minutes for
DURATION.
4. Touch to confirm.
5. Use or to set the hours for DU-
RATION.
If you touch or while you set the
DURATION, the appliance switches to
the setting of the END function.
6. When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
Touch a sensor field or open the oven
door to stop the acoustic signal.
7. Deactivate the appliance.
11