Philco POB 62 - Příručka (Stránka 56)

Setting the END
1. Activate the appliance and set an oven
function and temperature.
2. Touch again and again until the dis-
play shows . flashes in the dis-
play.
3. Use or to set the END (first you
set the minutes and then the hours)
and
or to confirm.
4. When the set time ends, an acoustic
signal sounds for two minutes.
symbol and the time setting flash in
the display. The appliance deactivates.
5. Touch a sensor field or open the oven
door to stop the acoustic signal.
6. Deactivate the appliance.
Check result (selected models
only)
If you set the END or DURATION function,
two minutes before the end of cooking an
acoustic signal sounds and the lamp acti-
vates. The appliance goes to the setting of
the END or DURATION function. During
these two minutes you can examine the re-
sults of the cooking, and, if necessary, add
the END or DURATION time.
Setting the SET+GO
1. Set an oven function (or programme)
and temperature (refer to "Setting the
oven function" and "Changing the tem-
perature").
2. Set the DURATION (refer to "Setting
the DURATION").
3. Touch again and again until
flashes in the display.
4. Touch to set the SET+GO function.
The display shows and with an
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
You can use the SET+GO function only
when the DURATION is set.
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a count-
down (maximum 2 h 30 min). This function
has no effect on the operation of the oven.
You can set the MINUTE MINDER at any
time and also when the appliance is off.
1. Touch . and "00" flash in the dis-
play.
2. Use or to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3. Touch or the MINUTE MINDER
starts automatically after five seconds.
4. When the set time ends, an acoustic
signal sounds for two minutes and
00:00 and
flash in the display.
5. Touch a sensor field or open the oven
door to stop the acoustic signal.
Setting the Time delay function
The DURATION and END functions
can be used at the same time, if the oven is
to be activated and deactivated automati-
cally later. In this case, first set the DURA-
TION
and then the END function (re-
fer to "Setting the DURATION" and "Setting
the END" ).
When the Time delay function is activated,
the display shows a static symbol of the
oven function,
with a dot and . The
dot shows which clock function is on in the
Clock / residual heat display.
AUTOMATIC PROGRAMMES
Warning! Refer to the Safety chapters.
There are 25 automatic programmes
and recipes. Use an automatic pro-
gramme or recipe when you do not
have the knowledge or experience on
how to prepare a dish. You can find the
list of the recipes for the automatic pro-
grammes in the "Recipe book".
There are three types of automatic
programmes:
• Automatic recipes
• Automatic programmes with weight input
• Automatic programmes with the core
temperature sensor
12