Philco POB 62 - Příručka (Stránka 81)

Problem Possible cause Remedy
The appliance does not heat
up. The fuse is released. Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
The lamp does not operate. The lamp is defective. Replace the lamp.
The display shows an error
code that is not in this list. There is an electrical fault. • Deactivate the appliance with
the house fuse or the safety
switch in the fuse box and
activate it again.
• If the display shows the error
code again, contact the
Service Center.
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre. The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
Warning! Refer to the Safety chapters. Important! The built-in unit must meet the
stability requirements of DIN 68930.
min.
3 mm
37