Philco POB 62 - Příručka (Stránka 58)

2.
Put the tip of the core temperature sen-
sor (with
on the handle) into the
centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows
and the default
set core temperature. The temperature
is 60 °C for the first operation, and the
last set value for each subsequent op-
eration.
4. Touch or to set the core tem-
perature.
5. Touch or the settings save auto-
matically after 5 seconds.
Useful information:
You can set the core temperature only
when
flashes. If is in the dis-
play but does not flash before you set
the core temperature, touch
and
or to set a new value.
6. Set the oven function and, if necessary,
the oven temperature.
The display shows the current core
temperature and the temperature bar,
which shows the relation between the
set oven temperature and the current
oven temperature.
Useful information:
The core temperature sensor must stay
in the meat and in the socket during the
cooking.
While the appliance calculates the ap-
proximate duration time, the value of
the Count Up Timer function shows in
the Timer / residual heat display. When
the first calculation ends, an acoustic
signal sounds and the Timer / residual
heat display shows —:— and then the
approximate duration of the cooking.
The appliance continues to calculate
the duration during the cooking. The
display updates at intervals with the
new duration value.
7. When the meat is at the set core tem-
perature, the core temperature and
flash. An acoustic signal sounds for two
minutes. Touch a sensor field to deacti-
vate the acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the meat
from the appliance.
Warning! Be careful when you remove
the core temperature sensor. It is hot.
There is a risk of burns.
9. Deactivate the appliance.
When you put the core temperature
sensor into the socket, you cancel the
settings for the clock functions.
When you cook with the core temperature
sensor, you can change the temperature
shown in the Temperature / Time display.
After you put the core temperature sensor
into the socket and set an oven function
and temperature, the display shows the
current core temperature.
Touch again and again to see three
other temperatures:
• The set core temperature
• The current oven temperature
• The current core temperature.
The set core temperature changes into the
current core temperature and the current
oven temperature changes into the set
oven temperature.
14