Philco POB 62 - Příručka (Stránka 54)

Oven function Application
17 ECO Roasting ECO functions let you to optimize the energy consumption
during cooking. Thus it is necessary to set the cooking time
first. To get more information about the recommended set-
tings, refer to the cooking tables with the equivalent usual oven
function.
Setting the oven function
1. Activate the appliance with . The
display shows the set temperature, the
symbol and the number of the oven
function.
2. Touch or to set an oven func-
tion.
3. Touch or the appliance starts auto-
matically after five seconds.
If you activate the appliance and do not
set an oven function or programme,
the appliance deactivates automatically
after 20 seconds.
Changing the temperature
Touch / to change the temperature
in steps of 5 °C.
When the appliance is at the set tempera-
ture, an acoustic signal sounds three times
and the Heat up indicator goes out.
Checking the temperature
You can see the temperature in the appli-
ance when the function or programme op-
erates.
1. Touch
. The Temperature / Time
display shows the temperature in the
appliance. If you want to change the
oven temperature, touch
one more
time and use or .
2. Touch to go back to the set tem-
perature or the display shows it auto-
matically after five seconds.
Fast heat up function
The Fast heat up function decreases the
heat up time.
Activating the Fast heat up function:
Touch and hold
for more than three
seconds.
If you activate the Fast heat up function, the
bars on the display
flash one by one and
comes on to show that the function
operates.
Additional information:
• Do not put food into the oven when the
Fast heat up function operates.
• The Fast heat up is not available with all
oven functions. An acoustic signal
sounds if the Fast heat up is not available
for the set function.
Steam cooking
The water drawer cover is in the control
panel.
1. Press the cover to open the water
drawer.
2. Fill the water drawer with 800 ml of wa-
ter.
The water supply is sufficient for ap-
proximately 50 minutes.
Important! Do not put water directly into
the steam generator!
Use only water as the liquid. Do not use fil-
tered (demineralised) or distilled water.
3. Activate the appliance.
4. Set the Steam function (refer to the
"Oven functions" table) and the temper-
ature.
5. Touch to set the DURATION or END
function (refer to "Setting the END" or
"Setting the DURATION"). The first
steam shows after approximately 2 mi-
nutes. An acoustic signal sounds when
the appliance is at approximately the
set temperature. The signal sounds
again at the end of the cooking time.
6. Touch to deactivate the acoustic
signal and the appliance.
When the steam generator is empty, an
acoustic signal sounds.
When the appliance cools down, soak up
all remaining water from the steam genera-
tor with the sponge. If necessary, clean the
steam generator with vinegar. Let the appli-
ance dry fully with the door open.
10